Strong Sticky Hot Sale Insect Fly Glue

Product Description

Viscose shellac application

First, used to make sticky fly belt, sticky worm plate, etc. Different adhesive shellac can be used to produce adhesive tape, adhesive board, adhesive fly board, cockroach house, etc. The key to the problem is: different products should use different viscose shellac, can not be universal. The industrial production process of these products has matured and formed a complete industrial chain.
Two, directly apply the trunk. The common problem with direct application of shellac to tree trunks is that it is extremely difficult to apply. In order to solve this problem, different manufacturers have tried various methods, and there has been no cheap solution for many years. The common solution is to adjust the viscose shellac formula to liquefy it. However, the performance of the product is greatly reduced, and it cannot even be called viscose shellac.” “Injectable shellac” solves the above problems.
Third, according to the different phototaxis of different pests, made of different colors to attract pests. Yellow sticky shellac is applied to the white carrier board to make the yellow board, and blue shellac is applied to the white carrier board to make the blue board, which is used to destroy pests such as thrips. Milky white viscose shellac is applied to the white carrier board, which is used to make white armyworm board, which is used to destroy pests such as diamond-moth.

Viscose shellac classification

Viscose shellac According to the different application places, viscose shellac can be divided into the following two types:
(1) Indoor sticky shellac suitable for use in the living environment, such as: sticky fly glue, cockroach glue, etc. It is characterized by lower adhesion than field type, simple production technology and flexible formulation.
(2) Field-type adhesives used under natural conditions for destroying pests, such as: haha glue, gun adhesive shellac, injection adhesive shellac. Its characteristics are: strong adhesion, anti-aging, complex production process, high accuracy requirements.

According to different formulations, it is divided into the following types:

(1) Environmental protection hot melt pressure sensitive products of this type are complex to prepare and relatively high cost.
(2) Traditional rosin pressure sensitive products of this type are mostly used in the preparation of indoor viscose shellac. Most domestic production plants are using this kind of adhesive shellac. (3) Other pressure-sensitive types of this kind of viscose shellac are uneven in good and bad, and it is difficult to distinguish between true and false.

According to the appearance of adhesive shellac, it can be divided into:

(1) Colorless or milky white high viscosity glue, this kind of glue has the best quality. Environmentally friendly and suitable for field use.
(2) Light yellow glue, a large part of this kind of glue is rosin adhesive, a small part is a low-grade polybutene mixture, and some use polypropylene, polybutene blended into viscose shellac.
(3) Black glue, this kind of glue is a rubber-type pressure sensitive adhesive, which has an unpleasant smell and is mostly used for rat repair.

Removal method:

1. When just glued, it can be soaked in warm water and then cleaned with dish soap.
2. if the glue has been stuck to the hands, you can use cooking oil to clean and soften, clean the glue, and then wash the oil off the hands with soap.
3. you can also scrub with white wine, and then soak in warm water to remove the adhesive. Extended information A type of adhesive paper used to trap flies. When in use, the made sticky flypaper is lifted from the edge of the paper by hand, and placed in the place where flies often fly or dense, as long as the fly touches or falls on the paper, it will be firmly stuck. If hung near the light, it can also stick mosquitoes and other flying insects. Preparation of tape paper: Put the Arabic gum into a container, add 1/3 of the water in the formula, so that it is completely dissolved, then cut the kraft paper into strips, brush the glue on a and B kraft paper, dry. Make fly glue: put rosin in the porcelain pot, add the remaining 2/3 water, heat, wait for the rosin to dissolve, and then heat the evaporation of water, when the water in the pot is fast dry, quickly add the paulowne oil and castor oil, stir well, and then add the honey to evenly, continue to heat evaporation of excess water.